U-shaped glass, also known as Groove Glass, is a new kind of construction glass, there are nearly 40 years of overseas production and use of pre-history. Because the section is U-shaped, compared with ordinary flat glass, it has higher mechanical strength, ideal transparency, better sound insulation, heat insulation, can save a lot of metal materials, as well as the advantages of simple construction, etc. , suitable for the construction of external and internal walls, partitions, roofing and windows.

And we often take the u-glass popular to explain as a kind of U-shaped glass, U-shaped glass is often used in our lives, but we also lack some correct understanding of it; U-glass according to color, appearance and strength can be roughly divided into three types: from the color difference, there are colorless and colored; From the strength of the difference between wire mesh and non-wire mesh. In our country, the material of U-shaped glass appeared in the late 1970s. Because the glass production enterprises and related construction departments are very strange to this glass, so this new glass has never been developed, let alone the promotion and application. With the continuous development of our national economy and the continuous improvement of the People's living standards, in our construction and decoration design departments, production departments and circulation fields, and other joint efforts, this new construction glass in our country will be able to be promoted and applied to achieve rapid development.

U-shaped glass production methods are calendering, rolling and casting several methods, but is commonly used or calendering. So U-shaped glass is useful widely in our country's construction and industrial industries. How much do we know about the design of U-shaped glass? Here are some ideas about the design of U-shaped glass. Let's follow U-shaped glass manufacturers to find out:

How to design a U-shaped glass:

1. There are many methods to deal with the surface of U-shaped glass, such as fine grain, clear-cut, color and so on. In addition to the general fine grain, other types need to be marked. 

2. u-glass is a non-combustion material, we can do a good fire grade, if there are special requirements in accordance with the relevant standards design mark. 

3. The installation method of U-shaped glass refer to the installation combination method. The double-row wings are usually installed in pairs at the joint, or the single-row wings are installed inside or outside.

4. U-shaped glass for exterior wall, the length of the installation depends on the local wind load, the height of the glass from the ground, etc. .

The above is the u-glass manufacturers for everyone to do a summary, I hope you can help!