A process for the installation of a chemically produced U-shaped frosted glass. The process is:

（1）Cleaning and drying: the main production of U-type frosted glass with water to clean the flat glass, remove dust, stains, and then drying;

（2）Lifting: put the cleaned and dried flat glass into the lifting frame. The touching part of the lifting frame and the glass is supported by the toothed rubber bracket. It is a vertical discharge. The distance between the glass and the glass is a certain distance and is lifted by crane;

（3）Corrosion: with a crane will plate glass together with the lifting frame immersed in the corrosion box, the use of conventional corrosion solution immersion glass, corrosion time of 5-10 minutes, after lifting with a crane, leaching residue;

（4）Softening: after leaching the residue, a layer of residue is attached to the installation of U-shaped frosted glass, which is softened in the softening box. The glass is immersed in the conventional softening solution, and the softening time is 1-2 minutes to remove the residue

（5）Cleaning: because corrosion and softening of the U-shaped frosted glass body with many chemicals, so it is necessary to clean the frosted U-shaped glass planning to put the glass into the washing machine chute, the slideway drives the U-shaped frosted glass into the washing machine. The washing machine sprays water while turning the brush. When the U-shaped frosted glass is taken out of the washing machine by the washing machine slideway, the cleaning of the U-shaped frosted glass is finished

（6）The cleaned U-shaped frosted glass is put into the drying room to be dried, and then into single-sided or double-sided U-shaped frosted glass.

The surface of U-shaped frosted glass is rough, diffuse light transmission without perspective: the light is reflected through the U-shaped frosted glass and then spread out to the rest of the world (because the U-shaped frosted glass mounting surface is not a lubricated surface, the light is diffuse) , refraction into the retina is already an incomplete image, so you can not see the back of the glass. It can make the indoor light soft and not harsh.