U-shaped glass of building curtain wall often needs“Three-character test”, and in-plane deformation performance test when necessary. The quality of curtain wall project can be guaranteed only when it is inspected by a regular quality inspection organization. Then how to divide the energy-saving inspection batch of U-shaped glass for building curtain wall? Below you can follow the small make-up together to learn more.

In modern cities, many large-scale buildings have adopted the U-shaped glass curtain wall as the building envelope. Compared with the single solid wall, the U-shaped glass of building curtain wall is favored by users because of its light weight, beautiful overall effect, various colors and fashionable trends. The energy-saving test of U-shaped glass for building curtain wall has also been put on the agenda. In order to ensure the overall quality of the curtain wall, inspection must be fair and just.

1. For the same unit project of discontinuous curtain wall project, the inspection batch shall be divided separately. 

2. For curtain walls with the same design, process and construction conditions, there should be one inspection batch for every 500-1000 square meters, and one inspection batch for those less than 500 square meters. Each inspection lot shall be inspected at least once every 100 square metres and no less than 10 square metres shall be inspected at any one time. How to deal with uneven U-shaped glass joint of building curtain wall? 

3. For building curtain wall U-shaped glass irregular shape or have special requirements, the division of inspection batch and the inspection quantity of each inspection batch shall be determined by the supervision unit, the construction unit and the construction unit according to the curtain wall structure, the technological characteristics and the curtain wall project scale.

The above is about how to divide the“Building curtain wall u-glass” energy-saving inspection batch, I hope this article can help you.